Cyl Head Protectors.
Posted: Sat Feb 16, 2019 11:51 am
which are the best/most popular?
BMW R1200RT/R1250RT Forum
A forum community dedicated to BMW R 1200 RT/R 1250 RT motorcycle owners and enthusiasts. Come join the discussion.
http://mail.1200rt.com/
Cyl Head Protectors.
Page 1 of 2
Re: Cyl Head Protectors.
Posted: Sat Feb 16, 2019 1:06 pm
I've got the BMW ones on my bike
Re: Cyl Head Protectors.
Posted: Sat Feb 16, 2019 2:49 pm
I used the BMW ones on my 2014 and trabsferred them to my current 2018.
The good thing is that the plastic insert is easily replaceable should you ever drop the bike. Oops like I did trying to do a silly U-turn in Scotland (as swimbo keeps reminding me) on a bad road fully loaded.
In fact it was only the plastic insert that was marked after a very gentle let down. I managed to file off the rough part and never got around to changing it.
The good thing is that the plastic insert is easily replaceable should you ever drop the bike. Oops like I did trying to do a silly U-turn in Scotland (as swimbo keeps reminding me) on a bad road fully loaded.
In fact it was only the plastic insert that was marked after a very gentle let down. I managed to file off the rough part and never got around to changing it.
Re: Cyl Head Protectors.
Posted: Sat Feb 16, 2019 3:21 pm
BeeJay wrote: I used the BMW ones on my 2014 and trabsferred them to my current 2018.
The good thing is that the plastic insert is easily replaceable should you ever drop the bike. Oops like I did trying to do a silly U-turn in Scotland (as swimbo keeps reminding me) on a bad road fully loaded.
In fact it was only the plastic insert that was marked after a very gentle let down. I managed to file off the rough part and never got around to changing it.
Was it only the cylinder head covers that got damaged, or did the panniers and tupperware have any damage. After not fitting engine bars to my bikes, I am now considering whether to invest in some bars and forget cylinder head protectors. I have dropped a RTP before which had bars and there wasn't a mark on the bike.
Re: Cyl Head Protectors.
Posted: Sat Feb 16, 2019 4:36 pm
Just the plastic insert on the covers. Swimbo said it looked like slow motion as I gently let it com to rest.
Very pleased, just annoyed.
Very pleased, just annoyed.
Re: Cyl Head Protectors.
Posted: Sun Feb 17, 2019 6:38 pm
Ordered the BMW ones from the recommendations.
Re: Cyl Head Protectors.
Posted: Mon Feb 18, 2019 2:23 pm
+1 for the BMW guards. Fitted those and also some bumper protectors (Halfords, about £10) along the bottom of the panniers where the bike rests if it falls over. They look fine, like they were supposed to be there. Had one very slow drop and those were the only two places to touch down.
Re: Cyl Head Protectors.
Posted: Mon Feb 18, 2019 2:45 pm
Sprintgull wrote: +1 for the BMW guards. Fitted those and also some bumper protectors (Halfords, about £10) along the bottom of the panniers where the bike rests if it falls over. They look fine, like they were supposed to be there. Had one very slow drop and those were the only two places to touch down.
Any chance of a photo of bumper protectors on your bike?
I presume you mean these,
https://www.halfords.com/motoring/car-accessories/exterior-protection/richbrook-bumper-bodywork-protector-370mm
Re: Cyl Head Protectors.
Posted: Tue Feb 19, 2019 4:24 pm
+1 for the BMW guards and the Halfords protectors.
Re: Cyl Head Protectors.
Posted: Tue Feb 19, 2019 5:59 pm
BMW impact protectors
Re: Cyl Head Protectors.
Posted: Wed Feb 20, 2019 9:36 am
Excellent idea, any chance of a pic of where you stuck em on please?Sprintgull wrote: +1 for the BMW guards. Fitted those and also some bumper protectors (Halfords, about £10) along the bottom of the panniers where the bike rests if it falls over. They look fine, like they were supposed to be there. Had one very slow drop and those were the only two places to touch down.
Re: Cyl Head Protectors.
Posted: Wed Feb 20, 2019 10:58 am
Bmw covers came but no instructions. Couldnt find any on net. Anyone able to help?
Re: Cyl Head Protectors.
Posted: Wed Feb 20, 2019 12:08 pm
Beagle wrote: Bmw covers came but no instructions. Couldnt find any on net. Anyone able to help?
Ok found them.
https://www.bmw-motorrad-bohling.com/uk/lanotattachments/download/file/id/539/store/7/cylinder_head_cover_guard.pdf
Re: Cyl Head Protectors.
Posted: Wed Feb 20, 2019 11:04 pm
Beagle wrote: Bmw covers came but no instructions. Couldnt find any on net. Anyone able to help?
Top pieces mount quite easy, but be cautious when you position bottom pieces, to make sure there is good case contact all the way around perimeter of piece. The 3m double stick is very thin, and not very wide....
I posted a pic of my first attempt in previous post. I placed mine in wrong position first attempt, had to remove, install new 3m tape and reinstall.
Re: Cyl Head Protectors.
Posted: Fri Feb 22, 2019 5:51 pm
Sprintgull wrote: +1 for the BMW guards. Fitted those and also some bumper protectors (Halfords, about £10) along the bottom of the panniers where the bike rests if it falls over. They look fine, like they were supposed to be there. Had one very slow drop and those were the only two places to touch down.
Hi, Sprintgull,
Did you use any Loctite on the screws?