Page 1 of 1
Top Case Connector
Posted: Wed Apr 03, 2019 9:08 am
by circlehappenork
Hi, I've got two questions about the cylindrical connector for the big RT/LT('14-'18) top case:
1. How do I open up the male part of the 10 pin connector?
http://www.autotestaid.com/productshow.asp?id=1195
2. Which wire form the top case is going to which pin number?
Re: Top Case Connector
Posted: Wed Apr 03, 2019 11:20 am
by David.
Re: Top Case Connector
Posted: Wed Apr 03, 2019 1:25 pm
by circlehappenork
Thanks David.
The second picture answered my second question. I've read through the topic on the lt forum, but didn't found how to disassemble the connector to be able plug in the wires from top case.
Atm my connector looks like this.
Re: Top Case Connector
Posted: Wed Apr 03, 2019 2:33 pm
by David.
circlehappenork wrote:I've read through the topic on the lt forum, but didn't found how to disassemble the connector to be able plug in the wires from top case.
Does the connector actually disassemble, or is a method similar to that in this video required,
https://www.youtube.com/watch?v=-7oSpcL1jBY
Re: Top Case Connector
Posted: Wed Apr 03, 2019 3:20 pm
by circlehappenork
Yep, you're right David. I've got to push it out. Thanks so much!
Re: Top Case Connector
Posted: Wed Apr 03, 2019 4:04 pm
by David.
This is the tool which the guy in the video used,
https://www.lislecorp.com/specialty-too ... minal-tool others are available, might be worth contacting Lisle.
Lisle - Wire Terminal Tool Kit,
https://www.youtube.com/watch?v=K6FLYaPcUrk