Page 1 of 1
Central locking remote not working
Posted: Sun Jul 12, 2020 9:38 pm
by Dee Dub
Remote fob LED flashes, but the bike doesn't respond. I've replaced the fob's battery, no difference. Central locking works when I press the handlebar button, which helps for now but I can't activate the alarm.
Any ideas? What can I check, please?
Background note: This is almost certainly a co-incidence (?) but the problem started when I removed the rear wheel. The remote hasn't worked since.
Re: Central locking remote not working
Posted: Sun Jul 12, 2020 10:01 pm
by scunny12
I have the same problem, like you I thought it was a battery key fob issue. I have done the synchro/ recalibrate as per manual but still not working. Due for a service and MOT in a couple of weeks so the BMW dealer can have a play.
Re: Central locking remote not working
Posted: Mon Jul 13, 2020 5:23 pm
by Dee Dub
Thanks. I went through the various registering rigmaroles too, and was getting no confirmatory "acoustic signals" as indicated in the manual. However, somehow this has cleared the problem and the remote locking/alarm now works!
Now if I could just remember where the hell I've 'safely hidden' the spare fob, I'd check that one too!
Good luck with fixing your problem Scunny.
Re: Central locking remote not working
Posted: Tue Jul 14, 2020 3:31 pm
by smileymiley
When I reset mine a couple of months ago, theres a post on here somewhere, I too had no beeps or beeps, both remotes reset fine. Very strange!