The base is held in place very firmly by 8 x 8mm x 3mm (doubled stacked for extra strength so you only see the 4). Can be lifted off for maintenance.
[attachimg=1]
[attachimg=2]
[attachimg=3]
[attachimg=4]
Clutch reservoir mount for camera control & GPS sensor - 3D printed
-
- Posts: 54
- Joined: Thu Aug 30, 2018 12:11 am
- Has liked: 2 times
- Been liked: 4 times
Clutch reservoir mount for camera control & GPS sensor - 3D printed
R1250RS • R1200RT • Commando 850 Mk 2a