Page 1 of 1
2014 R1200RT cam chain tensioner installation
Posted: Thu Sep 14, 2023 4:23 pm
by lowflyer2000
Firstly I'm at 200,000km and looking to replace my cam tensioner(s) - annoying ticking and mileage - and wanted to know:
1. Is this something I can EASILY do myself i.e access and,
2. would an aftermarket part be suggested and if so site suggestions.
Re: 2014 R1200RT cam chain tensioner installation
Posted: Thu Sep 14, 2023 4:58 pm
by Stu
Yes very easy to replace both the tensioners just unscrew them and screw the new ones in with a new washer and to the correct torque
I would personally stick the the OEM parts
Re: 2014 R1200RT cam chain tensioner installation
Posted: Mon Mar 16, 2026 4:28 pm
by Hovedskou
NO...
On th R1200RT it is impossible to get the left tensioner out because the telelever joint is in the way!
So the telelever must come off! It's not an easy job!
Re: 2014 R1200RT cam chain tensioner installation
Posted: Mon Mar 16, 2026 8:47 pm
by Stu
Hovedskou wrote: Mon Mar 16, 2026 4:28 pm
NO...
On th R1200RT it is impossible to get the left tensioner out because the telelever joint is in the way!
So the telelever must come off! It's not an easy job!
This is not true
I have taken the tensioner out on both side when doing a valve check and they aren't anywhere near the telelever
Are you maybe talking about an earlier model
Re: 2014 R1200RT cam chain tensioner installation
Posted: Tue Mar 17, 2026 5:07 am
by Hovedskou
Ahh.. sorry...
a 2014 may be different from my 2010..
