2024 1250 RT Top case wiring
Posted: Fri Feb 14, 2025 2:49 pm
Can anybody assist me?
Ive had the top case come off the bike when I dropped it, The case itself has only a little damage BUT the wiring harness stayed connected to the bike and its been strained to the extent of breaking 4 of the wires just where the rubber grommet allows entry into the box itself, I know its canbus wired and so sensitive to resistances et. I want to try a soldered.sleeved repair to the wiring but there is 4 wires broken one side and only 3 available broken ends the other side of the break, Looks like two wires are 'common' and splice onto just one the other side of the break. Question is which colours go to where!! Not all wire colours match,,,,anyone know which goes where or of a damaged top box with the canbus wiring loom in it I can buy. Its apparently not available from BMW. New box at around £800?..no thanks!!
Ive had the top case come off the bike when I dropped it, The case itself has only a little damage BUT the wiring harness stayed connected to the bike and its been strained to the extent of breaking 4 of the wires just where the rubber grommet allows entry into the box itself, I know its canbus wired and so sensitive to resistances et. I want to try a soldered.sleeved repair to the wiring but there is 4 wires broken one side and only 3 available broken ends the other side of the break, Looks like two wires are 'common' and splice onto just one the other side of the break. Question is which colours go to where!! Not all wire colours match,,,,anyone know which goes where or of a damaged top box with the canbus wiring loom in it I can buy. Its apparently not available from BMW. New box at around £800?..no thanks!!