Page 1 of 1
Timing bolt replacement...
Posted: Fri Aug 05, 2016 8:14 pm
by Sullivj
My timing bolts were annoyingly rusty, which was playing havoc with my OCD..
So today, I swopped them for new ones. BMW only charge £27.94 for 12 bolts!!!!!!
Before:
After:
And my rusted old bolts:
Re: Timing bolt replacement...
Posted: Fri Aug 05, 2016 8:23 pm
by David.
DaygloDavid wrote:I'd like to replace the original (now corroded after 3 years) Timing Cover Screws & Washers on my 2012 Twin Cam RT.
The BMW Part No. is 07 12 9 905 537 & they cost £2.33 each x 12 = £27.96.
A trip to Hawk Fasteners in Middlesbrough came up with some Stainless Steel M6 x 30 Socket Head Cap Screws & Washers (12 off) for £6.21.
https://1200rt.com/viewtopic.php?p=9310#p9310
Re: Timing bolt replacement...
Posted: Fri Aug 05, 2016 8:32 pm
by Sullivj
Yes, I could easily have got them cheaper, but I've had problems before with inferior quality steel.
I'm not saying yours are, but I wanted to be sure.
It was made even worse because BMW transposed the part number I gave them, and sold me 12 bolts initially for £13.06!!
It's been an expensive experience!
Re: Timing bolt replacement...
Posted: Fri Aug 05, 2016 8:37 pm
by David.
A2 Stainless Steel is not the same grade or quality as A4, but still better than BMW OE.
I was initially offered some A2 Screws but the finish on the heads was poor, (could have been a faulty batch).
The guy in the store suggested using A4 at twice the cost.
Re: Timing bolt replacement...
Posted: Sat Aug 06, 2016 7:57 am
by stayingupright
Sullivj wrote:
Yes, I could easily have got them cheaper, but I've had problems before with inferior quality steel.
And the original BMW ones were top quality?
Maybe there is a clue in the fact that the ones you have just bought are more than likely the same as the rusty old ones you've just replaced.
